* Click here to visit our new Roland website.


10 x 10 24-bit/192kHz Hi-SPEED USB Audio Interface (UA-1010)

DriversOCTA-CAPTURE Driver for Mac OS X

This is the OCTA-CAPTURE (Ver.1.5) driver for Mac OS X v10.4 / v10.5 / v10.6 / v10.7 / OS X v10.8 / OS X v10.9.
Please use this version with the OCTA-CAPTURE system program Ver.1.5.0 or later.


* Uninstall the old driver before you install the new driver.For details on the uninstallation procedure, refer to the Readme.htm file that was created when you extracted the archive.

* When you use this driver version, the OCTA-CAPTURE system program must be updated to the latest version (Ver.1.5.0 or later).

* Since audio buffer settings are initialized after updating the driver, please setup the audio buffer settings in the driver again.

Update history
[ Ver.1.5.2 ] ( Updated only for OS X Mavericks (10.9))
Made workaround for the following issue.
  • Some certain Mac models with OS X Mavericks (10.9) exhibited symptoms such as recording or playback was not working properly.

[ Ver.1.5.1 ]
  • Installation program is now available on OS X Mountain Lion (10.8). (2012.07.26)
  • Installation program is now available on OS X Mavericks (10.9). (2013.10.23)

[ CAUTION on OS X Mavericks (10.9) ]
* If Mac sleeps while playing a music file in the Finder, and then Mac resumes, the Finder may freeze. Here's procedures to recover the Finder:
  1. Press command - option - esc keys at the same time.
  2. Choose Finder and click [Relaunch] button.
  3. The display will indicate "Do you want to force Finder to quit?"; click [Relaunch] button.

* If Mac sleeps while using an audio application, like DAW, and then Mac resumes, playback/recording may not work. If this happens, please relaunch the audio application.

Apple and Roland are looking into these two issues now.

System requirements
This driver has the following requirements.

* Please also check the System requirements for the audio/MIDI application and the operating system you're using.

Operating System
Mac OS X v10.4.11 / v10.5 / v10.6 / v10.7 / OS X v10.8 / OS X v10.9
Apple Mac series computer with on-board USB

* Even if connected to a USB 3.0 port, the performance of the product will not change.
* Mac computers running Microsoft Windows are not supported.

Caution if using a Mac equipped with a 64-bit processor
On Mac OS X v10.7 / v10.6, software that is 64-bit compatible will run in 64-bit mode.
If your software does not run correctly in 64-bit mode, you may be able to avoid the problem by starting up your software in 32-bit mode as follows.
  1. If your software is running, close it.
  2. Control-click the icon for your software, and choose "Get Info."
  3. Under "General," check "Open in 32-bit mode."
    * This setting is not available for software that is not 64-bit compatible.
  4. Start up your software.

  • Apple, Mac OS and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
  • All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

To the top of page