* Click here to visit our new Roland website.


Digital Snake Modular rack chassis

UpdatesS-4000S / S-4000H System Program Ver.2.500

This program is used to update the S-4000H, S-4000S-3208, S-4000S-0832 and S-4000S-MR system software to the most recent version.

Products:S-4000H / S-4000S-0832 / S-4000S-3208 / S-4000S-MR

Version history
[ → Ver.2.500 ]
  • You can remote-control the Preamp by using S-4000R or S-4000 RCS even if a SLEVE equipment or M-48 is not connected when the REAC mode is MASTER.
  • Supports 44.1 / 48 kHz sampling rates on S-4000H. Therefore, it can be connected with V-Mixer.
    * S-4000H will be displayed on V-Mixer as S-4000S that has 32out / 8in when it is connected with V-Mixer such as M-400.

Items to prepare for the update
Following items are required to perform the update.
  • S-4000S or S-4000H itself
  • S-4000 RCS (Version 2.0 or later)
  • Windows PC equipped with serial (RS-232C) port and can run S-4000 RCS software properly.
  • Serial cable (The remote cable contained as part of S-4000R accessory or ordinary sold RS-232C cable : D-Sub 9pins, male-female, straight type)

How to download and expand the archive file
Download the file named "s4000_v2500.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "s4000_v2500" holding the file "S-4000.BIN" will be appeared.

How to update
Please refer to the attached document "Process to update S-4000S/S-4000H" (S-4000S_update_e2.pdf) for more information such as the update procedure.

License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

Supplementary file

ダウンロード (411.0 KB)

To the top of page