* Click here to visit our new Roland website.


V-Mixer Live Mixing Console

Additional ToolM-400 RCS Ver.2.320 for Windows

M-400RCS is application software that runs on Microsoft(R) Windows(R).
With this software installation, your computer can remotely control M-400 or edit M-400 projects.


  • Please read "M-400 RCS Version 2 User's Guide" (M-400RCS_v2_e04.pdf) for details of this software.

[ Ver.2.320 ]
  • Compatible with the M-480 Ver.2.320.
[ Ver.2.310 ]
  • Compatible with the M-400 Ver.2.310.
Functionality Added
  • Added R-1000 as the input/output units selectable in the "REAC Config" dialog box.
  • Added the "System Setup" in the "Setup" menu.
[ Ver.2.300 ]
  • Compatible with the M-480 Ver.2.300.
[ Ver.2.200 ]
  • Revised the supported Operating Systems list as followings.
    • Windows Vista -> Windows Vista SP1
    • Windows XP SP2 -> Windows XP SP3
  • Compatible with the M-400 Ver.2.200.
  • Added the function to adjust the data transfer rate between M-400 and M-400 RCS.
[ Ver.2.111 ]
Following bug fixed.
  • When FX1/2/3/4 or GEQ1/2/3/4 was set as the following, each parameter of the 8-BAND PEQ was set incorrectly.
    * This problem occurs in Ver.2.110 only.
    • FX1/2/3/4
      • Effect Type: DUAL GEQ
      • EQ MODE: 8-BAND PEQ
    • GEQ1/2/3/4
      • EQ MODE: 8-BAND PEQ

Download the file named "m400_rcs_v2320.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, "M-400 RCS" folder will be appeared.

Copy the "M-400 RCS" folder to the drive of your computer.

In the "M-400 RCS" folder, double-click "M-400RCS.exe".

  • Installation of M-400 Driver for Windows is necessary for connection of your computer with M-400.
  • The system version of M-400 must be matched with M-400 RCS version.
  • The contents of the files are subject to change without notice for improvement of the program.


Microsoft(R) Windows(R) 8.1 32-bit Edition
Microsoft(R) Windows(R) 8.1 64-bit Edition
Microsoft(R) Windows(R) 8 32-bit Edition
Microsoft(R) Windows(R) 8 64-bit Edition
Microsoft(R) Windows(R) 7 32-bit Edition
Microsoft(R) Windows(R) 7 64-bit Edition
Microsoft(R) Windows Vista(R) 32-bit Edition (Service Pack 1 or later)
Microsoft(R) Windows Vista(R) 64-bit Edition (Service Pack 1 or later)
Microsoft(R) Windows(R) XP Home Edition (Service Pack 3 or later)
Microsoft(R) Windows(R) XP Professional (Service Pack 3 or later)
* Doesn't work with 64-bit editions of Windows XP.
A Windows(R) compatible computer with a USB port that supports USB Specification Revision 1.0 or higher
Pentium(R), Celeron(R), Intel-compatible Processor/1.6GHz or higher
512MB or bigger
1024 x 768 (XGA) or higher, 65,536 colors (16-bit color) or higher

* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.
* You can connect the M-400 to a USB connector that supports USB 2.0. However, even when connected to a USB 2.0 connector, it will operate only as a USB 1.0/1.1 device. This will not affect the performance of the M-400 console itself.
* Microsoft and Windows are registered trademarks of Microsoft Corporation.
* Pentium and Celeron are registered trademark of Intel Corporation.
* All product names mentioned in this document are trademarks or registered trademarks of their respective owners.

License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

Supplementary file

ダウンロード (4.0 MB)

To the top of page