* Click here to visit our new Roland website.


Mixing Console

System ProgramM-380 Ver.1.320 System Program

This is the software to make your M-380 up-to-date.


How to tell the version
Please check the version of the system working on your M-380 before downloading the archive file.
  1. Press [SYSTEM] to invoke the system screen.
  2. INFORMATION at the left in the display indicates the versions of your unit.
    • System Version : Version of the system
    • Panel Version : Firmware version of the panel unit
    • Fader Version : Firmware version of the fader unit
*Don't perform the update if the product is already up-to-date.

Version history
[ Ver.1.320 ]
Functionality Added
* Please read "M-380 Version 1.3 Owner's Manual Addendum" ( M-380_v13Added_e01.pdf ) for details of this software.
  • New functionality has been added to DCA groups.
    • CHANNEL DISPLAY screen added for DCA groups
  • New functionality has been added for monitoring.
    • Dimmer function
    • Prohibition of operation from the LEVEL knobs in the top panel's MONITOR section
  • New functionality has been added for patchbay.
    • PREAMP EDIT popup
  • New functionality has been added for user settings.
    • Always starts up with GUEST mode.
    • Prohibition of specified operations.
  • New functionality has been added to the user buttons.
  • Added the following functions for the RS-232C control.
    Please refer to the "V-Mixer RS-232C Reference version 2.1 ( V-Mixer_RS-232C_v21_e01.pdf )" for detailed information.
    • Control command
      - Monitor dimmer on/off
      - USB memory recorder transport
      - USB memory recorder locate
      - Song select
    • Request command
      - Monitor dimmer request
      - USB memory recorder status request
      - USB memory recorder current position request
      - Song number request
      - Song name request
      - Recording remain time request
  • DCA group operation via MIDI control change message has been added.
    • Please refer to "M-400/M-380 MIDI Implementation (M-400_M-380_MIDI_Imple_e03.pdf)" for detailed information.
Following bug was fixed.
  • When you recall a scene memory loaded from the project file with "ON" setting of LCR SYSTEM, the following message appears. "The Scene is stored with different LCR System settings. Are you sure you want to RECALL?"
[ Ver.1.310 ]
Functionality Added
  • A function has been added to exclusively switch off sends to MAIN L/R or to MAIN C when sends to MAIN L/R and MAIN C are on.
  • Functions that can be assigned to user buttons have been added.
  • A function has been added that automatically applies the channel names on the M-380 to the track names on the R-1000 when an R-1000 48-track recorder/player is connected and the M-380 is used as a recording source.
  • The following RS-232C commands have been added.
    For more information, refer to "V-Mixer RS-232C Reference."
Function Improvements
  • Improved behavior of the fader touch sensitivity.
Following bugs were fixed.
  • In a rare case, M-380 could not boot up normally immediately after turned on.
  • Each group name for M-48 was displayed wrong when a M-48 specified as an Engineer's Monitor unit was released.
[ Ver.1.300 ]
Functionality Added
  • Added the function to control an R-1000 remotely.
    * Please refer to the "R-1000 Remote Control Guide" (V-Mixer_R-1000_control_e01.pdf) file for details.
[ Ver.1.200 ]
Following bugs fixed.
  • When the "TAP TEMPO" is assigned to user buttons 9 - 16, the function status assigned to user buttons 1 - 8 cannot be displayed correctly.
Function Improvements
  • Improved the project file format so that it can be loaded on M-480 and M-300.
  • Improved so that an alert message is displayed when the LOAD SECTION select button is not checked on the LOAD/SAVE popup.
  • The MAIN C and the MATRIX can be controled by using the MIDI Control Change messages.
User settings
  • Added the "MAIN FADER operation select button" on the USER PREFERENCE popup.
  • The settings of S-4000M cannot be changed from M-380 on unchecking the "SYSTEM SETUP" of the user level.
  • The "MUTE" can be assigned to the user buttons.
  • The "TALKBACK DESTINATION SELECT" can be assigned to the user buttons.
  • Added the [F6(PREV FADER)] and the [F7(NEXT FADER)] on the USER FADER ASSIGN popup.
  • Added the [F6(PREV FADER)] and the [F7(NEXT FADER)] on the USER BUTTON EDIT popup.
Other improvements
  • Improved so that the setting of the SENDS ON FADER mode does not changed from ON to OFF when SENDS ON FADER mode is turned on.
  • Added the "0.5dB STEP select button" on the FX EDIT popup for the GEQ.
  • Improved so that an alert message is displayed when a INITIALIZE SECTION select button is not checked on the INITIALIZE popup.
  • Supported the function(AutoMDI/MDI-X) which can auto-detect the types of ethernet cable which is a crossover cable or a straight cable.
[ Ver.1.111 ]
Following bug fixed.
  • When FX1/2/3/4 or GEQ1/2/3/4 was set as the following, each parameter of the 8-BAND PEQ was set incorrectly.
    * This problem occurs in Ver.1.110 only.
    • FX1/2/3/4
      • Effect Type: DUAL GEQ
      • EQ MODE: 8-BAND PEQ
    • GEQ1/2/3/4
      • EQ MODE: 8-BAND PEQ
[ Ver.1.110 ]
Following bugs fixed.
  • When you played a specific WAV file by the function of the USB memory recorder, the playback was stopped immediately.
Function Improvements
  • Engineer’s Monitor function has been added to the M-48 Manager.
  • M-48 mix option has been added.
  • Number of V-LINK remote sources has been increased to 16.
  • The “Mute” and “To MAIN” selection have been added to the Scene Global Scope function.
  • Input/output patchbay operation via the RS-232C has been added.
    * Please refer to the "V-Mixer RS-232C Reference" file for details.

Items to prepare for the update
Following items are required to perform the update.
  • M-380 itself
  • PC to write the updater to the USB memory key
  • USB memory key

How to download and expand the archive file
Download the file named "m380_sys_v1320.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, the folder "m380_sys_v1320" holding the file "M-380.PRG" will be appeared.

How to update
Please install the system program " M-380.PRG" to the M-380 by following the process below.
Important notice: Never turn the M-380 off during the update process, or M-380 won't reboot correctly any more.

  1. Put the "M-380.PRG" at the root folder of the USB memory key.
  2. Reboot the M-380 then insert the USB memory key to USB connector.
  3. Press [SYSTEM] to invoke the SYSTEM screen.
  4. Press [F7 (SYSTEM UPDATE)].

    Are you sure you want to update?

    Confirmation message will be displayed.
  5. Press [F8 (SYSTEM UPDATE)] to start the update process.

    Now Processing...

  6. At the end of the process, the message "Update complete. Please Reboot." will be appeared.

    Update competed.
    Please Reboot.
    Now, reboot the M-380 and check the version.

License Agreement

Be sure to read the Safety Instructions and the License Agreement before proceeding download.

Download file

Supplementary file

ダウンロード (3.4 MB)

ダウンロード (489.0 KB)

ダウンロード (823.0 KB)

ダウンロード (1.3 MB)

To the top of page